夹具订制
AGG可在机械手和模具间提供精i准的中心。
注塑模具内金属嵌件安放时尤其要注意这一点。
夹具AGG...B 安装在EOAT上,钢管 AGG...C 安装在模具上。
一旦机械手向模具靠近,夹具在压力的作用下逐步向钢管靠近,
并与之接触。
AGG21-B 和 AGG30-B 采用的是双动作安全弹簧,确保在压缩空
气 (NC)缺失时设备的正常运行。
AGG19-B 采用的是单动作复位弹簧(NO)。
Gripper for engagement
The AGG is used to provide a precise centering between the robot
and the mould.
This necessary when metal inserts must be p1aced in the
mould, before the p1astic injection.
The gripper AGG…-B is fitted on the EOAT, while the steel bushing
AGG…-C is fitted on the mould.
Once the robot has approached the mould, the gripper is
pressurized, thus it closes and engages the bushing.
AGG21-B and AGG30-B are double-acting with a safety spring to
keep the gripper engaged even without compressed air (NC).
AGG19-B is single-acting with reset spring (NO).
MGX系列自动对准双钳口平行i气动钳夹
• 平直侧面。
• 坚固导道。
• 高夹紧力。
• 重量轻、尺寸小。
• 高精度尺寸。
• 可带关闭弹簧(-NC)或开启弹簧(-NO)。
• FDA-H1 食品级润滑脂。
2 parallel self-centering pneumatic gripper
series MGX
• Flat profile.
• Robust guide.
• High gripping force.
• Small weight and dimensi0ns.
• High dimensional accuracy.
• Spring closed (-NC) or spring open (-NO) option.
• FDA-H1 food-grade grease.
带端子板的传感器盒
IP66聚苯i乙烯传感器盒。• 可定制的电缆进线和出线,配有标准电缆密封套。• 2个螺钉端子,可直接连接15个输入/输出 。• 随附铝挤压型材直接固定螺钉。• 每个连接线路的zui大开关电流达1A。
IP66 polystyrene sensor box.• Customizable cable input and output with standard cable gland
2 screw terminals with direct connection of 15 inputs/outputs. • Supplied complete with direct fxing screws for aluminum extruded profles.
Maximum switching current up to 1A for each connection line.
配置和指标
•S1:实现选择输出信号的类型,PNP(P/2)或NPN(N)。
•S2:分别根据NPN或PNP选择(通过S1)实现选择内部PULLUP(PU)或PULL-DOWN(PD)电阻器。
•L1:通电时为绿色。
•L2:当常闭系列输出切换时为琥珀色(例如:全部触点打开)。
•L3:当切换常开系列时琥珀色(例如:全部触点闭合)。
•S1: enables the selection of the type of output signal, PNP(P/2) or NPN (N).
•S2: enables the selection of internal PULL-UP (PU) or PULLDOWN(PD) resistors depending on the NPN or PNP selection(via S1), respectively.
•L1: green when powered.
•L2: amber when the NC series output is switched (e.g. allcontacts open).
•L3: amber when the NO series is switched (e.g. all contactsclosed).
以上信息由专业从事机器人抓手的应用的吉玛泰克于2024/7/5 12:48:00发布
转载请注明来源:http://shenyang.mf1288.com/jmtkzdh-2781117303.html
上一条:镀锌钢板规格欢迎来电「禾田昌鑫」